Ricoh 700 - Manual (Page 112)

Copying
96
2
B
Press the [Enlarge] or [Reduce] key.
C
Select a ratio.
D
Press the [OK] key.
E
Set your originals, then press the { Start } key.
Shrink&Center mode
Use “Shrink&Center” to reduce the image by 93% of its original size with the
center position as reference. You can register this function in a shortcut key on
the initial display. By combining it with the Reduce/Enlarge function, you can
also provide the Reduce/Enlarge copy with a margin.
Note
❒ You can register “Shrink&Center” in a shortcut key. See “Shortcut Keys” in
⇒
P.314 “General Features 3 /
3
” .
❒ You can change the Reduce/Enlarge ratio for “Shrink&Center”. See
“Shrink&Center Ratio” in
⇒
P.316 “Reproduction Ratio 2 /
2
” .
A
Press the [Shrink&Center] key displayed on the initial display.
B
If you do not wish to combine it with the Reduce/Enlarge function, set your
originals, then press the {
Start } key.