Ricoh 700 - Manual (Page 205)

Stamp
189
2
To change the stamp position
A Press the
[Change] key.
B Select the desired position.
C Press the
[OK] key.
F
After you specified all the desired settings, press the [OK] key.
Note
❒ To cancel the settings, press the [Cancel] key.
G
Press the [OK] key.
H
Set your originals, then press the { Start } key.
Program/Delete User Stamp
A
Make sure that the machine is in Copy mode.
B
Press the { User Tools/Counter } key.
TSPS040N
Screen
Contrast
User Tools/
Counter