Ricoh 700 User Manual
Page 207
Advertising
Stamp
191
2
To program the User Stamp
A Press the
[Program]
key.
B Press the stamp number (1 – 4) you want to program.
Note
❒ Stamp numbers with m already have settings in them.
❒ If the stamp number is already being used, the machine will ask you if
you wish to overwrite it — Press the
[Yes]
or
[No]
key.
C Enter the user stamp name with the letter keys on the display panel.
Note
❒ You can register up to 8 characters.
❒ To change the name entered, press the
[Back Space]
,
[Clear]
or {
Clear/
Stop
} key and enter new letters.
D Press the
[OK]
key.
Advertising
This manual is related to the following products: