Ricoh 700 User Manual

Page 229

Advertising
background image

Scanning Originals

213

3

The “Doc. server: Scanning” display appears.

C

Enter a file name.

Note

❒ If you do not wish to register a file name, go to step

D.

❒ If you do not register a file name, it is stored automatically.

To set the file name

A Press the

[Change File Name]

key.

B Enter the new file name using the letter keys on the display panel.

Note

❒ You can enter up to 8 letters.
❒ To switch to the capital letter mode or small letter mode, press the

[Upper

Case]

or

[Lower Case]

key.

❒ To change the letter entered, press the

[Back Space]

,

[Clear]

, or {

Clear/

Stop

} key and enter new letters. To delete the entered letters in 1 letter

steps, press the

[BackSpace]

key. To delete all the entered letters, press

the

[Clear]

or {

Clear/Stop

} key.

C Press the

[OK]

key.

D

Enter your password.

Note

❒ If you do not wish to enter a password, go to step

E.

Advertising
This manual is related to the following products:

551