Copying from the bypass tray, P.73 “copying from the bypass tray, 2copying from the bypass tray – Ricoh 700 User Manual

Page 89

Advertising

Copying from the Bypass Tray

Copying from the Bypass Tray

Use the bypass tray to copy onto OHP transparencies, adhesive labels, translu-
cent paper, postcards, and copy paper that cannot be set in the paper tray.

Limitation

❒ When copying several originals using the bypass tray, copies are delivered

face up (“Face Up Exit”) and in reverse order by default.

❒ You can change the setting to “Face Down Exit” only when you are using

high quality copy paper with a weight of 52 – 105g/m

(14 – 28 lb. Bond). See

“Face-Up/Down Selection in Bypass Mode” in

⇒

P.331 “Count Manager”.

❒ If you have copies delivered face down when copying onto special paper,

such as adhesive labels, a paper misfeed may occur. Be sure to select “Face Up
Exit”.

Note

❒ If you wish to have copies delivered face down when only one original is set

on the exposure glass or in the document feeder, you must set the “Face-Up/
Down Selection in Bypass Mode” setting to “Face Down Exit” and the “Face-
Up/Down Selection in Platen Mode” setting to “Face Down Exit” with the
User Tools. See “Face-Up/Down Selection in Bypass Mode” in

⇒

P.331

“Count Manager”

and “Face-Up/Down Selection in Platen Mode” in

⇒

P.329

“Input/Output”

❒ The machine can automatically detect the following sizes as standard size

copy paper:

❒ If you do not use the standard size copy paper, you should input vertical and

horizontal dimensions. The sizes that you can input are as follows:

❒ To make copies onto OHP transparencies or thick paper exceeding 105g/m