Ricoh 700 - Manual (Page 128)

Copying
112
2
❒ When original images are copied, the images are shifted by a width of the
binding margin. You can adjust the binding margin or binding position. You
can also change their default values. See “Front Margin: Left/Right”, “Back
Margin: Left/Right”, “Front Margin: Top/Bottom” and “Back Margin: Top/
Bottom” in
⇒
P.317 “Page Format 1 /
2
” .
❒ A binding margin can be automatically made on the back side. See “1 →
2 Du-
plex Auto Margin Adjust” in
⇒
P.317 “Page Format 1 /
2
” .
A
Press the [Duplex/Combine] key.
B
Press the [1 Sided] key for original, then press the [2 Sided] key for copy.
Note
❒ To change the copy orientation to “Top to Bottom”, press the [Orientation]
key and select [Top to Bottom] . See
⇒
P.110 “Specifying Orientation of Bound
Originals” .
C
Press the [OK] key.
D
Set your originals, then press the { Start } key.
When setting an original on the exposure glass or in the document feeder
using Batch (SADF) mode
Reference
⇒
P.36 “Batch (SADF) mode”.
A Set the original, then press the {
Start } key.
Note
❒ Start with the first page to be copied.