Toshiba Strata DK8 - Manual (Page 263)

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-13-
FIGURE 8
TEST MODE FUNCTION DIAGRAM
PUBLIC TELEPHONE
NETWORK REMOTE SITE STRATA DK16/DK8
PC OR
TERMINAL
REMOTE
STATION B
REMOTE
STATION C
CO LINE
CO LINE
TIME OR
WEATHER
Digital Telephone XX
CO-to-CO
CONNECTION
MODEM
(DK16: 300 or 1200 BPS)
RS-232 CO LINE CO LINE A
CO LINE B
CO LINE C
CO LINE C
CO LINE B
CO LINE A
IMDU OR EXT. MODEM
CPU
DATA
BUS
STATION
CKT
T S100
TOSHIBA
(DK8: 1200 BPS)
2) Establish a talk path between a remote station
and the time or weather service via a CO-to-
CO connection through STRATA DK8 or DK16.
10.13 The procedures in the tables provide ex-
amples of the types of tests and functions that can
be accomplished with the Test Mode. These proce-
dures do not cover all the possible tests that can be
performed remotely; however, by using the prin-
ciples given, other tests are possible.
11 LCD MESSAGE MODE
11.00 General
11.01 This mode allows a local or remote terminal
to set Called and Calling Station LCD messages for
station users (see Table RM-BO ~ BR). The mes-
sages may be system or station type and are stored
in their respective memory locations when set.
11.10 Remote Called Station Message Mode
11.11 Allows the terminal to set a Called Station
Message for an originating station with the destina-
tion of the message being a station or group of
stations.
11.12 When the message is set, the Msg LED(s)
on the destination station(s) flash.
11.13 When a destination station calls the originat-
ing station, the message is displayed on the desti-
nation station’s LCD.
Mode 94: To edit and/or review a Called Station
Message before setting it, use this mode. It will
print out the existing message and allow addi-
tions to it (such as a time or a date) before it is set.
(The message cannot be changed with this
mode—just added to.)
Mode 96: To add or change a Called Station
Message before setting it, use this mode. It does
not display the existing message, but allows a
completely new message to be entered before it
is set.
11.20 Remote Calling Station Message Mode
11.21 Allows the terminal to set a Calling Station
Message for a station. The message will be set on