Toshiba Strata DK8 - Manual (Page 291)

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-41-
TABLE RM-AK
PROGRAM 78
CO LINE SPECIAL RINGING ASSIGNMENTS-DISA/IMDU/
NIGHT RINGING OVER EXTERNAL PAGE
ACTION STEP DISPLAY/PRINTOUT
1 >MODE PROG
P
Enter Program Mode
At the >MODE prompt, enter
P R O G CR .
2 P 78
P78
Enter Program Number 78
3 P78 1
Press CR .
6 To Exit Program/Store Data
A)
B)
C)
To store data, press CR .
Continue returning to step 3 until all data has been entered
for this program.
To exit this program, press
# # CR .
Refer to the System Record Sheet and enter the feature number
for the feature to be programmed.
Example: Feature code 1, enter
1 .
4 P78 13 Refer to the System Record Sheet and enter the code number
for the area of the feature being programmed.
Example: Code 3, enter
3 .
P78 13 01 N
02 N Y
P78 ##
P
P78 13 01 N
02 N Y
Refer to the System Record Sheet and enter the CO line buttons
that will be associated with this feature.
Example: CO button 01, enter
0 1 .
The system will designate whether the CO button/LED is on/off.
Refer to the System Record Sheet and change if required.
Press
SPACE to display next CO button/LED.
5
NOTE:
Program 79 uses Type 2 procedure.