Toshiba Strata CS - Manual (Page 26)

3-2 S TRATA CS C LIENT U SER G UIDE
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
About placing calls on the phone_________________________
You can pick up a Strata CS phone and place a call in the same way that you place
calls with other phones. But you can also do much more. For example, you can
dial other Strata CS users by name and use special key combinations to redial your
last call or call back your last caller. Depending on your Strata CS system, you
can also place calls over Centrex lines or over the Internet.
This chapter explains the following aspects of placing Strata CS calls on the
phone:
n
Dialing internal and external numbers
n
Dialing by name
n
Placing calls while you are already on a call
n
Sending a Flash command to Centrex or another PBX
n
Redialing the last number you called, returned the last call that arrived,
and disabling call waiting for a call
n
Placing calls to an IP address
For information about placing calls visually by using the Strata CS Client, see
Chapter 11.
Dialing internal and external numbers_____________________
Internal calls are calls to other Strata CS extensions. External calls are calls to
outside numbers, including calls to another PBX or to a Centrex extension, calls
to another Strata CS system such as a branch office, and Internet calls.
To dial an internal number
1. Pick up the phone.
2. Do one of the following:
n
Dial the extension number.
n
Press 411 or *93 for the dial-by-name directory.
To dial an external number
You must dial an access code to start dialing an external number. Ask your Strata
CS system administrator what types of external calls are available in your system
and what access codes you must use.
1. Pick up the phone.
2. Enter <access code><phone number or IP address> .