Assembly – Bosch GRL 400 H Professional User Manual

Page 18

Advertising
background image

18 | English

1 619 929 J22 | (27.6.11)

Bosch Power Tools

Assembly

Power Supply of the Rotational Laser Level

Operation with Batteries/Rechargeable Batteries
Using alkali-manganese or rechargeable batteries is recom-

mended for operation of the measuring tool.
To open the battery compartment 8, turn the locking knob 9

to position

and pull out the battery compartment.

When inserting the batteries/rechargeable batteries, pay at-

tention to the correct polarity according to the representation

on the inside of the battery compartment.
Always replace all batteries/rechargeable batteries at the

same time. Do not use different brands or types of batteries/

rechargeable batteries together.
Shut the battery compartment 8 and turn the locking knob 9

to the position.
In case the batteries/rechargeable batteries have been insert-

ed incorrectly, the measuring tool cannot be switched on. In-

sert the batteries/rechargeable batteries with correct polarity.
f

Remove the batteries/rechargeable batteries from the

measuring tool when not using it for longer periods.

When storing for longer periods, the batteries/rechargea-

ble batteries can corrode and discharge themselves.

Operation with Battery Pack
Charge the battery pack 7 before using for the first time. The

battery pack can only be charged with the battery charger 15

intended for it.
f

Observe the mains voltage! The voltage of the power

source must correspond with the data on the type plate of

the battery charger.

Insert the appropriate mains plug 16 for your mains supply in-

to the battery charger 15 and allow it to engage.
Insert the charge plug 17 of the battery charger into the sock-

et connector 11 of the battery pack. Connect the battery

Operating life time, approx.

– Batteries (NiMH)

– Batteries (alkali-manga-

nese)

30 h

50 h

Weight according to

EPTA-Procedure 01/2003

1.8 kg

Dimensions

(length x width x height)

183 x 170 x 188 mm

Degree of protection

IP 56 (protected against dust

and powerful water jets)

Battery Charger

Article number

2 610 A13 782

Rated voltage

V~

100–240

Frequency

Hz

50/60

Output voltage

V=

7.5

Charging current

A

1.0

Allowable charging tempera-

ture range

°C

0–45

Charging time

h

14

Number of battery cells

2

Rated voltage

(per battery cell)

V=

1.2

Weight according to

EPTA-Procedure 01/2003

kg

0.2

Protection class

/II

Laser Receiver

LR 1

Professional

Article number

3 601 K15 400

Receivable wavelength

635–650 nm

Working range

3)

200 m

Receiving angle

120°

Receivable rotation speed

>200 min

-1

Measuring accuracy

4)

– “Fine adjustment”

– “Medium adjustment”

±1 mm

±3 mm

Operating temperature

– 10 °C ... +50 °C

3) The working range (radius) can be reduced due to unfavourable am-
bient conditions (e. g. direct sunlight).
4) depends on clearance between laser receiver and rotational laser level
Please observe the article number on the type plate of your laser receiv-
er. The trade names of individual laser receivers may vary.
For clear identification of your laser receiver, see the serial number 27
on the type plate.

Rotational Laser Level

GRL 400 H

Professional

1) at 20 °C
2) alongside the axes
Please observe the article number on the type plate of your rotational la-
ser level. The trade names of individual rotational laser levels may vary.
For clear identification of your rotational laser level, see the serial
number 13 on the type plate.

Storage temperature

– 20 °C ... +70 °C

Battery

1 x 9 V 6LR61

Operating life time, approx.

50 h

Weight according to

EPTA-Procedure 01/2003

0.36 kg

Dimensions

(length x width x height)

148 x 73 x 30 mm

Degree of protection

IP 65 (dust-proof and

protected against powerful

water jets)

Laser Receiver

LR 1

Professional

3) The working range (radius) can be reduced due to unfavourable am-
bient conditions (e. g. direct sunlight).
4) depends on clearance between laser receiver and rotational laser level
Please observe the article number on the type plate of your laser receiv-
er. The trade names of individual laser receivers may vary.
For clear identification of your laser receiver, see the serial number 27
on the type plate.

OBJ_DOKU-20994-002.fm Page 18 Monday, June 27, 2011 12:55 PM

Advertising