Alpha Technologies XM2, XM2-HV, XM2-HP - Manual (Page 25)

Pre-installation Inspection
1.
Remove the power supply from the shipping container. Confirm the power supply, including the
Remote Temperature Sensor and all other ordered options are included.
2. During shipping, components might shift. Carefully inspect the power supply and other contents
for possible shipping-related failures, such as loosened or damaged connectors. If any items are
damaged or missing, contact Alpha Technologies or the shipping company immediately. Most
shipping companies have a short claim period.
3.
Do not attempt to install a damaged power supply without first passing a complete pre-installation
inspection and start-up test.
2.0 Installation
Read the Safety Precautions, Utility Power Connection Notes and Grounding Connection
Notes (pages 8-13) before you install the power supply.
Use the original shipping container if the power supply needs to be returned for service. If the original
container is not available, make sure the unit is well packed with at least three inches of shock-
absorbing material to prevent shipping damage.
See the “Preliminary Inspection/Pre-Service Checklist” (Alpha P/N 017-805-B5) that accompanies
each power supply. SAVE THE ORIGINAL SHIPPING CONTAINER.
NOTE:
Do not use popcorn-type material. Alpha Technologies is not responsible for damage caused
by improper packaging of returned units.
CAUTION!
CAUTION!
2.1 Installation Procedure
The Intelligent CableUPS can be shelf-mounted within a variety of Alpha enclosures.
Complete the pre-installation instructions in Section 2.0 and the preliminary inspection and
self-test procedure before you install the power supply.
25 017-805-B0-010 Rev. K2