Alpha Technologies XM2, XM2-HV, XM2-HP User Manual
Page 52
Advertising
3.3.1
Output Voltage Switch (SW1) Settings, continued
Reconfiguration is a two-step process done while the power supply is switched OFF.
Adjust the output tap connector, as well as the output voltage switch (SW1), and
cycle the unit ON for the changes to be effective.
Table 3-3, Output Voltage switch settings for XM2-918HP, XM2-924HP
52
017-805-B0-010 Rev. K2
Legend
Power Supply Output tap connector settings
63Vac
75Vac
87/89Vac
Model
Output Voltage Switch Setting
XM2-918HP
XM2-924HP
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
OFF
63 Vac
75 Vac
87/89 Vac
63 Vac
75 Vac
87/89 Vac
63 Vac
75 Vac
87/89 Vac
ON
Advertising