0 specifications, 1 intelligent cableups north american models – Alpha Technologies XM2, XM2-HV, XM2-HP User Manual
Page 83
6.0 Specifications
6.1 Intelligent CableUPS North American Models
The following table shows the electrical, mechanical and physical specifications for the North
American models of the Intelligent CableUPS.
Models:
XM2-906HP
XM2-910
XM2-1350-48 XM2-915
XM2-915HV
XM2-922
XM2-922HV
XM2-918HP
XM2-924HP
Electrical
Input Voltage (Vac):
120/240
120/240
120/240
120/240
120/240
208/240
240
120/240
208/240
Input Voltage Window:
-30 to +20%
-20 to +15%
-20 to +15%
-20 to +15%
-30 to +15%
-20 to +15%
-30 to +15%
-20 to +15%
-20 to +15%
Input Frequency:
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
Input Frequency Window:
±3Hz
±3Hz
±3Hz
±3Hz
±3Hz
±3Hz
±3Hz
±3Hz
±3Hz
Output Voltage (Vac):
63/87
63/75/87
63/75/87
63/75/87
63/75/89
63/75/87
63/75/89
63/75/87
63/75/87
Output Current (A):
8/6
10/10/10
22/15/15
15/15/15
20/17.5/15
22/22/22
22/22/22
22/18/18
22/22/24
Max Output Power (VA):
540
900
1350
1350
1350
2025
2025
1620
2160
Output Waveform:
Quasi-square wave
Voltage Regulation
1
:
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Output
Frequency
Stability:
Line Mode
60Hz Nominal
Inverter Mode
60Hz, ±0.05%
Short Circuit Protection:
<150% of maximum current rating
Transfer Characteristics:
Uninterrupted output
Battery Voltage (Vdc):
36
36
48
36
36
48
48
36
48
Efficiency
(Typical Load Range)
Line Mode:
80-87%
86-90%
90-92%
Standby Mode:
79-84%
82-85%
84-86%
Battery Charger
Temperature Compensation:
Programmable (0 to 5mV/Cell/°C)
Charger Current:
10A at 80% load and nominal input (bulk charge mode)
Three Stage:
Bulk, Accept, Float
Mechanical
Status Display:
2 x 20 Blue LCD with backlight
Dimensions
H x W x D (in/mm):
8.8 x 15 x 13 / 222 x 381 x 330
Approx. Weight (lb/kg):
53/24
62/28.1
70/31.8
70/31.8
72/32.7
92/41.7
96/43.5
72/32.7
95/42.9
Finish:
Black, epoxy powdercoat
Environment
Operating Temperature:
-40 to 55°C / -40 to 131°F
Relative Humidity:
0 to 95% non-condensing
Agency Compliance:
FCC Part 15 Class A, UL1778, UL1012, CSA 22.2 No. 107.1
Optional Features
Standard Protective Interface Module (PIM/N+1): Provides two programmable outputs from a single XM2 CableUPS power supply for redundancy in critical applications. The PIM
protects system components and provides isolation between distribution legs by shutting down the individual load during over-current conditions.
1
Note: Voltage regulation is maintained over both line and load ranges.
Table 6-1 Specifications for North American Models
83
017-805-B0-010 Rev. K2