Alpha Technologies XM2, XM2-HV, XM2-HP - Manual (Page 87)

Fig. 7-1 Emergency Shutdown
7.1 Emergency Shutdown
The Intelligent CableUPS contains more than one live circuit. During an emergency, utility
power can be disconnected at the service entrance or main electrical panel to protect
emergency personnel. However, power is still present at the output. To prevent the possibility
of injury to service or emergency personnel, always follow this procedure to safely shutdown
the power supply.
Emergency Shutdown Procedure:
• STEP 1:
Turn the battery breaker to OFF.
• STEP 2:
Unplug the AC Input Line Cord from the service entrance.
• STEP 3:
Unplug both the Output 1 and Output 2 connections.
• STEP 4:
If applicable, unplug the N+1 connections.
1
3
4
2
87 017-805-B0-010 Rev. K2