Alpha Technologies XM2, XM2-HV, XM2-HP - Manual (Page 62)

Fig. 4-6, Setup Menu Display
(Examples are given for values in the display)
4.3 Smart Display Modes, continued
4.3.3 Setup Menu, continued
These items appear in the setup menu only if the
optional PIM is installed and selection = YES.
ALPhACELL 195GXL
NO. BATT STRIN 1
If battery type OTHER is selected, the menu
will appear as indicated left. If ALPHACELL is
selected, the section of the menu indicated in
white will be replaced by the options pictured
above (FLOAT, ACCEPT, TEMP COMP and BATT
CAPACITY are hidden and preset according to
the AlphaCell selected). Once the battery data
has been accepted, the operator will be prompted
to select the number of battery strings in the
system.
Second line
Top Line SETUP MENU
CODE VER
7.01.0
DEVICE ADDRESS 1
ALPhACELL OThER
FLOAT V/C
2.27
ACCEPT V/C 2.40
TEMP COMP 5mV
BATT CAPACITy 100Ah
STANDBy TIME 65 M
STANDBy EVENTS 12
TOTAL RUN TIME 365D
SELF TEST OFF
TEST INhIBIT —
TEST DURATION 10 M
FREq RANGE 3.0hz
TAP SW NO
PIM OPTION yES
RESET OUTPUT 1 —
RESET OUTPUT 2 —
OVER CURR 1 15.0A
OVER CURR 2 15.0A
RETRy DELAy 60S
RETRy LIMIT 20
OVER CURR TOL 3000ms
N+1 VALID NO
SET DEFAULTS NO
SELECT LANGUAGE
This line item appears only in Auto-scroll mode
62 017-805-B0-010 Rev. K2