Alpha Technologies XM2, XM2-HV, XM2-HP - Manual (Page 71)

Fig. 4-7, Output and Alarm LEDs
4.5 Smart Display LEDs
Two LEDs on the Smart Display indicate the condition and status of the Intelligent
CableUPS.
The green Output LED, when lit, indicates the power supply is functioning normally
and supplying output AC to the load. A flashing output LED indicates that a minor
alarm has been detected. If the Output LED is off, a major alarm has been detected.
The red Alarm LED flashes to indicate a major alarm has been detected. This state
clears when the alarm is no longer present. Under typical operating situations, the red
Alarm LED is off. This indicates normal power supply operation.
i2M OUT FREQ BAT IN
90V 15A 60Hz 36V 120
OUTPUT LED (green)
SOLID = Operation Normal
FLASHING = Minor Alarm
OFF = Major Alarm
ALARM LED (red)
FLASHING = Major Alarm
OFF = Minor Alarm
OFF = Operation Normal
71 017-805-B0-010 Rev. K2