Number of records – Teledyne 6200E - Sulfides Analyzer User Manual
Page 132

Operating Instructions
Model 6200E Instruction Manual
132
M6200E Rev: A1
To define the REPORT PERIOD, follow the instruction shown in section 6.11.2.2 then press:
Edit Data Channel Menu
SETUP X.X
0) CONC: ATIMER, 2, 4032, R
PREV NEXT INS DEL
EDIT
PRNT
EXIT
Exits to the main
Data Acquisition
menu.
SETUP X.X
NAME:CONC
<SET
SET>
EDIT
EXIT
Press SET> key until you reach REPORT PERIOD …
SETUP X.X
REPORT PERIODD:DAYS:0
0 0 0
ENTR EXIT
ENTR accepts the new string and
returns to the previous menu.
EXIT ignores the new string and
returns to the previous menu.
Press keys to set hours
between reports in the format :
HH:MM (max: 23:59). This is a
24 hour clock . PM hours are 13
thru 23, midnight is 00:00.
Example 2:15 PM = 14:15
Set the number of days
between reports (0-366).
IIf at any time an illegal entry is selected (e.g., days > 366)
the ENTR key will disappear from the display.
SETUP X.X
REPORT PERIODD:TIME:01:01
0 0 0 5
ENTR EXIT
SETUP X.X
REPORT PERIOD:000:00:05
<SET SET>
EDIT
EXIT
Use the PREV and NEXT
keys to scroll to the data
channel to be edited.
From the DATA ACQUISITION menu
6.11.2.6. Number of Records
The number of data records in the M6200E is limited to about a cumulative one million data points
in all channels (one megabyte of space on the disk-on-chip). However, the actual number of
records is also limited by the total number of parameters and channels and other settings in the
iDAS configuration. Every additional data channel, parameter, number of samples setting etc. will