Teledyne 6200E - Sulfides Analyzer - Manual (Page 45)

Model 6200E Instruction Manual Optional Hardware and Software
M6200E Rev: A1 45
5. OPTIONAL HARDWARE AND SOFTWARE
This section includes descriptions of the hardware and software options available for the Model
6200E UV Fluorescence H
2
S Analyzer. For assistance with ordering these options please contact the
sales department of Teledyne Analytical Instruments at:
TEL: 626-961-9221
TEL: 626-934-1500
FAX: 626-961-2538
FAX: 626-934-1651
WEB SITE: http://www.teledyne-ai.com
5.1. Rack Mount Kits (Options 20a, 20b & 21)
There are several options for mounting the analyzer in standard 19” racks.
OPTION NUMBER DESCRIPTION
OPT 20A Rack mount brackets with 26 in. chassis slides.
OPT 20B Rack mount brackets with 24 in. chassis slides.
OPT 21 Rack mount brackets only
5.2. Current Loop Analog Outputs (Option 41)
This option adds isolated, voltage-to-current conversion circuitry to the analyzer’s analog outputs.
This option may be ordered separately for any of the analog outputs, it can be installed at the
factory or added later. Call Teledyne Analytical Instruments sales for pricing and availability.
The current loop option can be configured for any output range between 0 and 20 mA. Information
on calibrating or adjusting these outputs can be found in 6.9.4.5.