Disabling/enabling data channels – Teledyne 6200E - Sulfides Analyzer User Manual
Page 135
Model 6200E Instruction Manual
Operating Instructions
M6200E Rev: A1
135
6.11.2.10. Disabling/Enabling Data Channels
Data channels can be temporarily disabled, which can reduce the read/write wear on the disk-on-
chip. The ALL_01 channel of the M6200E, for example, is disabled by default.
To disable a data channel, follow the instruction shown in section 6.11.2.2 then press:
Edit Data Channel Menu
From the DATA ACQUISITION menu
SETUP X.X
0) CONC: ATIMER, 2, 4032, R
PREV NEXT INS DEL
EDIT
PRNT
EXIT
Exits to the main
Data Acquisition
menu
SETUP X.X
NAME:CONC
<SET
SET>
EDIT
EXIT
SETUP X.X
CHANNEL ENABLE:ON
<SET SET>
EDIT
EXIT
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
SETUP X.X
CHANNEL ENABLE:ON
OFF
ENTR EXIT
Toggle key to turn
channel ON or OFF
Press SET> key until…