Gentec-EO Beamage-3.0 - Manual (Page 14)

Beamage-3.0 User Manual Revision 6.0 13
7. Let the auto-exposure find the correct exposure time. This should take a few seconds. If the
exposure time is at 100 ms and your beam is under exposed, please decrease the ND filter
attenuation. If the exposure time is at 0.2 ms and the beam is saturated (maximum is white)
please increase the ND filter attenuation;
8. Click on the “Subtract Background” in the Ribbon;
9. A message box will appear. Once this message appears, block your laser beam and click “OK”;
10. Once the “Please wait” message box disappears, you can unblock your laser beam;
11. The measures will appear in the “Home” tab on the right-hand side;
12. Choose the appropriate graphic for your measurement on the left hand-side:
a. 3D display;
b. 2D display;
c. XY display;
d. Beam tracking display.