Gentec-EO Beamage-3.0 - Manual (Page 34)

Beamage-3.0 User Manual Revision 6.0 33
5. HOME AND SETUP PANELS
The PC-Beamage-3.0 offers different panels to view the measures and set different options for the
Beamage-3.0.
Home: Controls the computation parameters and displays the beam’s diameter and centroid
information.
Setup: Controls the Beamage-3.0 parameters.
Data Acquisition: Controls the acquisition parameters
Divergence: Controls the divergence parameters and displays the results. This tab is available
when the Divergence button is activated in the Main Controls (refer to section 4.5.4).
Relative Position: Sets the origin position (0,0) to a user defined value and calibrates the Pixel
Magnification Factor. This tab is available when the Relative Position button is activated in the
Main Controls (refer to section 4.5.4).
Camera Lens: Calibrates the Pixel Multiplication Factor when using a Camera Lens. This tab is
available when the Camera Lens button is activated in the Main Controls (refer to section 4.5.4).
Fixed Crosshair: Set the crosshair origin position (0,0) to a user define value. This tab is
available when the Fixed Crosshair button is activated in the Main Controls (refer to section 4.5.4).
To choose the desired display mode, click on the corresponding tab above the Controls and Measure
panel
Figure 5-1 Graphic Display