Gentec-EO Beamage-3.0 - Manual (Page 39)

Beamage-3.0 User Manual Revision 6.0 38
5.2. SETUP
The “Setup” tab allows the user to set the Beamage-3.0 parameters.
Figure 5-6 Setup Tab
Exposure time: Controls the Beamage-3.0 sensor’s exposure time.
Image orientation: Rotates or flips the captured image.
Image Averaging: Applies a temporal filter by averaging multiple frames
Active Area: Selects the region of interest.
Pixel Addressing: Reduces the spatial resolution by averaging or decimating pixels.
Gain: Adds numerical gain to captured image.
ADC Level: Selects the BEAMAGE’s ADC level for each pixel
Pixel Multiplication Factor: Adjusts the pixel multiplication factor when using optical components