Gentec-EO Beamage-3.0 User Manual
Page 9
Beamage-3.0 User Manual Revision 6.0
8
Damage Thresholds
Maximum Average
Power
1 W with ND filter
Saturation Level
(1064 nm, CW, ND4)
10 W/cm
2
Saturation Level
(1064 nm, Pulsed,
ND4)
300 µJ/cm
2
PC Requirements
USB Port
USB 3.0 port for optimal performance
USB 2.0 port
Operating System
Compatibility
Windows 8 (for optimal performance)
Windows 7 (for optimal performance)
Windows Vista
Average RAM
Allocation
500 MB
Up to 1250 MB for128 images in buffer
Recommended
Requirement
4 Gb RAM minimum
8Gb RAM for optimal performance
Intel i series processors (i3, i5, i7) or equivalent for optimal performance,
other processors will have lower specifications.
i7 for optimal performance
Beamage-3.0 is a new and a high end product. It needs an equally recent
high end computer to work. Computer hardware must be from 2010 or
after. No computer or parts bought before 2010 will be supported
For Optimal
Performance
Close all programs except the PC-Beamage-3.0;
Keep a minimum of 1 GB RAM free when running the PC-
Beamage-3.0;
Keep a minimum of 50% of free CPU power when running the
PC-Beamage-3.0
Use an Image Buffer of 1
Multi Camera
Recommendations
When working with more than one camera, we strongly
recommend using one USB3.0 port per camera and a recent high
end computer for optimal performance
Internet Upgrades
Downloadable at
Physical Characteristics
Dimensions
61 H x 81.1W x 19.7D
Weight
138 g
Default Attenuation
ND 4.0
Measured and Displayed Parameters
Displays
3D, 2D, XY (crosshair), Beam Tracking