Gentec-EO Beamage-3.0 - Manual (Page 76)

Beamage-3.0 User Manual Revision 6.0 75
11) You will be prompted to connect the camera. Connect it through your USB port, but DO NOT
CLICK ON OK RIGHT AWAY. Wait for the following message to appear at the bottom right of
your screen before clicking on OK.
Figure B- 11: Driver installed successfully (1)
Figure B- 12: Connect the camera
12) Another window will inform you that you can now use PC-Beamage-3.0. Click on OK.
Figure B- 13: You can now use PC-Beamage-3.0
13) To allow the device to be recognized by your computer, unplug and plug back the USB cable.