Gentec-EO Beamage-3.0 - Manual (Page 71)

Beamage-3.0 User Manual Revision 6.0 70
ANNEX B BEAMAGE-3.0 DRIVER INSTALLATION QUICK GUIDE
1) Do not connect the Beamage-3.0 ’s USB cable to your computer before installing the appropriate
software and drivers. The camera will not be recognized if so.
2) The latest available version of PC-Beamage-3.0 must be installed before setting the drivers. It
can be downloaded from the Download tab in the bottom of the following web page:
https://gentec-eo.com/products/beam-diagnostics/Beamage-3.0 .
3) If the software is already installed on your computer, please make sure it is the latest available
version of PC-Beamage-3.0. To do so, open the PC-Beamage-3.0 software and click on About.
Another window will appear and you will be able to Update the software.
Figure B- 1: PC-Beamage-3.0