Gentec-EO Beamage-3.0 - Manual (Page 49)

Beamage-3.0 User Manual Revision 6.0 48
4. Enter this distance (in mm) in the appropriate box and press enter.
5. Finally, click on the “Calibrate” button to automatically set the Pixel Multiplication Factor (PMF)
value
found in the bottom of the “Setup” tab. Once the PMF is set, the beam dimensions will be
adjusted to compensate for the magnification of the camera lens (Beam Tracking Display).
Figure 5-17 Pixel Multiplication Factor Section
6. To return to original values for the Pixel Multiplication Factor, click on “Reset”
5.7. FIXED CROSSHAIR
To activate the fixed crosshair option, go to the Home panel, in the Main Controls section and choose the
Fixed option.
Figure 5-18 Fixed Crosshair Section
This will automatically open the Fixed Crosshair panel. The “Setup” section, which displays the coordinate
system of the sensor on the right side, allows the user to select the parameter that will be considered as
the origin of the crosshairs (0,0).