Beamage-3.0 mechanical drawings, Igure, Eamage – Gentec-EO Beamage-3.0 User Manual
Page 11: Ront and, Iews
Beamage-3.0 User Manual Revision 6.0
10
1.2.1. Beamage-3.0 Mechanical Drawings
Figure 1-1 Beamage-3.0 Front and Side Views
Aperture: The Beamage-3.0
’s aperture and screw threads are C-MOUNT allowing easy
connectivity with optical accessories such as attenuation filters, UV converters or lenses. The
sensor is centered with the aperture’s center.
LED Indicator: The LED indicates if the Beamage-3.0 has been detected by the computer and
if it is currently streaming.
USB 3.0 connector: The USB 3.0 connector is now more rugged with its screwable holes.
Please note that only USB 3.0 compliant cables can be used with the Beamage-3.0. USB 2.0
ports can be used, but it will lower the Beamage-3.0 speed performances.
SMA connector: The SMA connector is used to externally trigger the Beamage-3.0. A SMA to
BNC adaptor is available.
Post holes:
¼”-20 holes are aligned with the sensor’s center allowing easy optical alignment.