Apture, Ontrols, Camera status – Gentec-EO Beamage-3.0 User Manual
Page 17: Igure, Eamage, Elector for, Umerous, Onnected, Amera, Tatus
![background image](/manuals/347647/17/background.png)
Beamage-3.0 User Manual Revision 6.0
16
Figure 4-3 Beamage-3.0 Selector for Numerous Connected Beamage-3.0
Warning
Multiple Beamage-3.0 beam profilers can be connected to a single
computer. However, PC-Beamage-3.0 is not a multiple device software so
you need to open a new instance of the program for each camera that is
connected to your computer.
4.2.
CAPTURE CONTROLS
The
“Capture Menu” displays the Beamage-3.0 current status, controls the capture, and captures an
average detector background map.
Figure 4-4 Capture Controls
4.2.1. Camera Status
Figure 4-5 Camera Status
The software will automatically detect when a Beamage-3.0 is connected to the computer and it will be
indicated in the Camera Status with a green button, while a red button indicates that there is no
Beamage-3.0 connected. When the PC-Beamage-3.0 is capturing an image, the status green button will
flash as well as the LED on the Beamage-3.0. Each time the Beamage-3.0
’s pixels are capturing an