Gentec-EO Beamage-3.0 - Manual (Page 28)

Beamage-3.0 User Manual Revision 6.0 27
IR Sensors Filter
The “Filters” button also contains the “IR Sensors” correction factor. With a Beamage-3.0-IR camera, this
filter must be activated. Then, a correction factor is applied to the intensity of each pixel. There is the pixel
intensity correction formula:
4.5.2. Normalize
Figure 4-28 Normalize Button
The “Normalize” button will spread the graph’s (3D, 2D, and XY) intensity over the full range (0% to
100%). Note that only the displays are normalized, the normalization does not affect the centroid and
diameter computations.
Figure 4-29 Normalization Example