Gentec-EO Beamage-3.0 - Manual (Page 43)

Beamage-3.0 User Manual Revision 6.0 42
5.3. DATA ACQUISITION
The “Data Acquisition” tab allows the user to set the acquisition parameters. It is possible to save the
beam profiling results shown in the measure tab (refer to section 5.1.2) in a *TXT file. The *TXT file
includes a header, containing the acquisition settings, followed by the data. Each line corresponds to a
single frame and all the measurements are separated by a tab. This file can be opened in a spreadsheet
software, such as Microsoft Excel. It is also possible to save the images associated with the
measurements saved in the *.TXT logging file. Each image will be individually saved in a native *.BMG
file.
Figure 5-9 Example File of a Measurement Acquisition
To start the acquisition, click on the “Start Data Acquisition” button in the “Main Controls” (refer to section
4.3.4).
Figure 5-10 Data Acquisition Tab