Displaying lldp local device information – Asante Technologies 40240/40480-10G User Manual
Page 255
•
System Capabilities Supported – The capabilities that define the primary
function(s) of the system.
Table 12-2 System Capabilities
ID Basis
Reference
Other —
Repeater
IETF RFC 2108
Bridge
IETF RFC 2674
WLAN Access Point
IEEE 802.11 MIB
Router
IETF RFC 1812
Telephone
IETF RFC 2011
DOCSIS cable device
IETF RFC 2669 and IETF RFC 2670
End Station Only
IETF RFC 2011
•
System Capabilities Enabled – The primary function(s) of the system which are
currently enabled. Refer to the preceding table.
•
Management Address – The management address protocol packet includes the
IPv4 address of the switch. If no management address is available, the address
should be the MAC address for the CPU or for the port sending this advertisement.
Interface Settings
The attributes listed below apply to both port and trunk interface types. When a trunk
is listed, the descriptions apply to the first port of the trunk.
•
Port Description – A string that indicates the port’s description. If RFC 2863 is
implemented, the ifDescr object should be used for this field.
•
Port ID – A string that contains the specific identifier for the port from which this
LLDPDU was transmitted.
12-6
Link Layer Discovery Protocol
12