Asante Technologies 40240/40480-10G - Manual (Page 592)

show garp timer [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-26/50)
• port-channel channel-id (Range: 1-32)
Default Setting
Shows all GARP timers.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show garp timer ethernet 1/1
Eth 1/ 1 GARP timer status:
Join timer: 20 centiseconds
Leave timer: 60 centiseconds
Leaveall timer: 1000 centiseconds
Console#
Related Commands
garp timer (34-4)
Editing VLAN Groups
Table 34-3 Commands for Editing VLAN Groups
Command Function
vlan database Enters VLAN database mode to add, change, and delete
VLANs
vlan Configures a VLAN, including VID, name and state
Mode
GC
VC
vlan database
This command enters VLAN database mode. All commands in this mode will take
effect immediately.
Default Setting
None
Command Mode
Global Configuration
34-5
Editing VLAN Groups
show garp timer
This command shows the GARP timers for the selected interface.
Syntax
34
Page
34-5
34-6