Chapter 13: class of service, Layer 2 queue settings, Setting the default priority for interfaces – Asante Technologies 40240/40480-10G User Manual
Page 265: Local vlan capable, Class of service
![background image](/manuals/34922/265/background.png)
Web – Click Priority, Default Port Priority or Default Trunk Priority. Modify the default
priority for any interface, then click Apply.
Figure 13-1 Default Port Priority
CLI – This example assigns a default priority of 5 to port 3.
Console(config)#interface ethernet 1/3
Console(config-if)#switchport priority default 5
Console(config-if)#end
Console#show interfaces switchport ethernet 1/3
Information of Eth 1/3
Broadcast threshold:
Enabled, 500 packets/second
LACP status:
Disabled
Ingress rate limit:
Disable, 1000M bits per second
Egress rate limit:
Disable, 1000M bits per second
VLAN membership mode:
Hybrid
Ingress rule:
Disabled
Acceptable frame type:
All frames
Native VLAN:
1
Priority for untagged traffic: 5
GVRP status:
Disabled
Allowed VLAN:
1(u),
Forbidden VLAN:
Console#
13-2
27-1
35-3
27-11
Class of Service
13