Asante Technologies 40240/40480-10G - Manual (Page 733)

1625 2 0 0
1625 2 0 0
Table 42-7 show ip rip - display description
Description
IP address of the interface.
RIP version sent on this interface (none, RIPv1, RIPv2, or RIPv2-broadcast)
RIP version received on this interface (none, RIPv1, RIPv2, RIPv1 or RIPv2)
Shows if split-horizon, poison-reverse, or no protocol message loopback
prevention method is in use.
Shows if authentication is set to simple password , MD5, or none.
IP address of the interface.
Number of bad RIP packets received.
Number of bad routes received.
Number of route changes.
IP address of a neighboring RIP router.
Last time a route update was received from this peer.
Whether RIPv1 or RIPv2 packets were received from this peer.
Number of bad RIP packets received from this peer.
Number of bad routes received from this peer.
42-17
Example
Console#show ip rip configuration
Interface SendMode ReceiveMode Poison Authentication
--------------- --------------- ------------- -------------- ------------------
10.1.0.253 rip1Compatible
10.1.1.253 rip1Compatible
Console#show ip rip status
RIPv1Orv2 SplitHorizon noAuthentication
RIPv1Orv2 SplitHorizon noAuthentication
Interface RcvBadPackets RcvBadRoutes SendUpdates
--------------- --------------- -------------- ---------------
10.1.0.253
10.1.1.253
Console#show ip rip peer
0 0 13
0 0 13
Peer UpdateTime Version RcvBadPackets RcvBadRoutes
--------------- ------------ --------- --------------- --------------
10.1.0.254
10.1.1.254
Console#
Field
show ip rip configuration
Interface
SendMode
ReceiveMode
Poison
Authentication
show ip rip status
Interface
RcvBadPackets
RcvBadRoutes
SendUpdates
show ip rip peer
Peer
UpdateTime
Version
RcvBadPackets
RcvBadRoutes
Routing Information Protocol (RIP)
42