Asante Technologies 40240/40480-10G - Manual (Page 5)

About This Manual
Purpose
This guide gives specific information on how to operate and use the management functions of the switch.
Audience
The guide is intended for use by network administrators who are responsible for operating and maintaining network
equipment; consequently, it assumes a basic working knowledge of general switch functions, the Internet Protocol (IP),
and Simple Network Management Protocol (SNMP).
Conventions
The following conventions are used throughout this guide to show information: Note: Emphasizes important information or
calls your attention to related features or instructions. Caution: Alerts you to a potential hazard that could cause loss of
data, or damage the system or equipment.
Warning: Alerts you to a potential hazard that could cause personal injury.
Related Publications
The following publication details the hardware features of the switch, including the physical and performance-related
characteristics, and how to install the switch: The Installation Guide Also, as part of the switch’s software, there is an
online web-based help that describes all management related features.
Revision History
This section summarizes the changes in each revision of this manual.
June 2009 Revision
This is the first release of this manual.