Asante Technologies 40240/40480-10G - Manual (Page 71)

Link Layer Discovery Protocol
Configures global LLDP timing parameters
Configures parameters for individual ports
Configures parameters for trunks
Displays LLDP information about the local device
Displays LLDP information about a remote device connected to
a port on this switch
Displays LLDP information about a remote device connected to
a trunk on this switch
Displays detailed LLDP information about a remote device
connected to this switch
Displays LLDP statistics for all connected remote devices
Displays LLDP statistics for remote devices on a selected port or
trunk
Sets the default priority for each port
Sets the default priority for each trunk
Maps IEEE 802.1p priority tags to output queues
Enables/disables traffic class priorities (not implemented)
Sets queue mode to strict priority or Weighted Round-Robin
Configures Weighted Round Robin queueing
Globally selects IP Precedence or DSCP Priority, or disables
both.
Sets IP Type of Service priority, mapping the precedence tag to
a class-of-service value
Sets IP Differentiated Services Code Point priority, mapping a
DSCP tag to a class-of-service value
Globa ly enables or disables IP Port Priority
Sets TCP/UDP port priority, defining the socket number and
associated class-of-service value
Table 3-2 Switch Main Menu (Continued)
Menu Description Page
LLDP
Configuration
Port Configuration
Trunk Configuration
Local Information
Remote Port Information
Remote Trunk Information
Remote Information Details
Device Statistics
Device Statistics Details
Priority
Default Port Priority
Default Trunk Priority
Traffic Classes
Traffic Classes Status
Queue Mode
Queue Scheduling
IP Precedence/
DSCP Priority Status
IP Precedence Priority
IP DSCP Priority
IP Port Priority Status
IP Port Priority
12-1
12-1
12-3
12-3
12-5
12-8
12-8
12-9
12-11
12-13
13-1
13-1
13-1
13-3
NA
13-5
13-6
13-7
13-8
13-10
13-11
13-8
14-1 QoS Quality of Service
DiffServ
Class Map
Policy Map
Service Policy
3-8
Configure QoS classification criteria and service policies 14-1
Creates a class map for a type of traffic 14-2
Creates a policy map for multiple interfaces 14-4
Applies a policy map defined to an ingress port 14-7
Configuring the Switch
3