Asante Technologies 40240/40480-10G - Manual (Page 624)

Priority Commands (Layer 3 and 4)
show map ip dscp
This command shows the IP DSCP priority map.
Syntax
show map ip dscp [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-26/50)
• port-channel channel-id (Range: 1-32)
Command Mode
Privileged Exec
Example
Console#show map ip dscp ethernet 1/1
DSCP mapping status: disabled
Port DSCP COS
--------- ---- ---
Eth 1/ 1 0
Eth 1/ 1 1
Eth 1/ 1 2
Eth 1/ 1 3
0
0
0
0
0
0
0
61
62
63
Related Commands
map ip dscp (Global Configuration) (35-10)
map ip dscp (Interface Configuration) (35-10)
35
35-13
.
.
.
Eth 1/ 1
Eth 1/ 1
Eth 1/ 1
Console#