Management ip filter commands, Management, Management 25-35 – Asante Technologies 40240/40480-10G User Manual
Page 501: Table 25-14 ip filter commands, Show management, 36 user authentication commands
Example
This example restricts management access to the indicated addresses.
Console(config)#management all-client 192.168.1.19
Console(config)#management all-client 192.168.1.25 192.168.1.30
Console#
show management
This command displays the client IP addresses that are allowed management
access to the switch through various protocols.
Syntax
show management {all-client | http-client | snmp-client | telnet-client}
•
all-client - Adds IP address(es) to the SNMP, web and Telnet groups.
•
http-client - Adds IP address(es) to the web group.
•
snmp-client - Adds IP address(es) to the SNMP group.
•
telnet-client - Adds IP address(es) to the Telnet group.
Command Mode
Privileged Exec
Example
Console#show management all-client
Management Ip Filter
HTTP-Client:
Start IP address
End IP address
-----------------------------------------------
1. 192.168.1.19
192.168.1.19
2. 192.168.1.25
192.168.1.30
SNMP-Client:
Start IP address
End IP address
-----------------------------------------------
1. 192.168.1.19
192.168.1.19
2. 192.168.1.25
192.168.1.30
TELNET-Client:
Start IP address
End IP address
-----------------------------------------------
1. 192.168.1.19
192.168.1.19
2. 192.168.1.25
192.168.1.30
Console#
25-36
User Authentication Commands
25