Asante Technologies 40240/40480-10G - Manual (Page 699)

show ipv6 mtu
This command displays the maximum transmission unit (MTU) cache for
destinations that have returned an ICMP packet-too-big message along with an
acceptable MTU to this router.
Command Mode
Normal Exec, Privileged Exec
Example
The following example shows the MTU cache for this device:
Console#show ipv6 mtu
MTU Since Destination Address
1400 00:04:21 5000:1::3
1280 00:04:50 FE80::203:A0FF:FED6:141D
Console#
Table 41-4 show ipv6 mtu - display description
Field Description
MTU Adjusted MTU contained in the ICMP packet-too-big message returned from this
destination, and now used for all traffic sent along this path.
Since Time since an ICMP packet-too-big message was received from this destination.
Destination Address Address which sent an ICMP packet-too-big message.
show ipv6 traffic
This command displays statistics about IPv6 traffic passing through this router.
Command Mode
Normal Exec, Privileged Exec
Example
The following example shows statistics for all IPv6 unicast and multicast traffic, as
well as ICMP, UDP and TCP statistics:
Console#show ipv6 traffic
IPv6 Statistics:
Ipv6 rcvd
rcvd total 1432
source routed
truncated
format errors
hop count exceeded
unknown protocol
not a router
fragments
total reassembled
reassembly timeouts
reassembly failures
Ipv6 sent
sent generated
forwarded
fragmented
0
0
0
0
0
0
0
0
0
0
1435
0
0
41-19
Basic IP Configuration
41