Show ip ospf neighbor – Asante Technologies 40240/40480-10G User Manual
Page 766
![background image](/manuals/34922/766/background.png)
show ip ospf neighbor
This command displays information about neighboring routers on each interface
within an OSPF area.
Syntax
show ip ospf neighbor
Command Mode
Privileged Exec
Example
Console#show ip ospf neighbor
ID Pri
State Address
--------------- ------ ---------------- ---------------
10.1.1.252 1
FULL/DR 10.1.1.252
Console#
Table 42-19 show ip ospf neighbor - display description
Field Description
ID Neighbor’s
router
ID
Pri
Neighbor’s router priority
State
OSPF state and identification flag
States include:
Down – Connection down
Attempt – Connection down, but attempting contact (for non-broadcast networks)
Init – Have received Hello packet, but communications not yet established
Two-way – Bidirectional communications established
ExStart – Initializing adjacency between neighbors
Exchange – Database descriptions being exchanged
Loading – LSA databases being exchanged
Full – Neighboring routers now fully adjacent
Identification flags include:
D – Dynamic neighbor
S – Static neighbor
DR – Designated router
BDR – Backup designated router
Address
IP address of this interface
42-50
IP Routing Commands
42