Asante Technologies 40240/40480-10G - Manual (Page 40)

Default
auto
8
1
none
0 (disabled)
Username “admin”
Password “admin”
Username “guest”
Password “guest”
Password “super”
Disabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Enabled
80
Enabled
443
1-7
System Defaults
System Defaults
The switch’s system defaults are provided in the configuration file
“Factory_Default_Config.cfg.” To reset the switch defaults, this file should be set as
the startup configuration file (page 4-24).
The following table lists some of the basic system defaults.
Table 1-2 System Defaults
1
Function
Console Port
Connection
Authentication
Web Management
Parameter
Baud Rate
Data bits
Stop bits
Parity
Local Console Timeout
Privileged Exec Level
Normal Exec Level
Enable Privileged Exec
from Normal Exec Level
RADIUS Authentication
TACACS Authentication
802.1X Port Authentication
HTTPS
SSH
Port Security
IP Filtering
HTTP Server
HTTP Port Number
HTTP Secure Server
HTTP Secure Port Number