Asante Technologies 40240/40480-10G - Manual (Page 395)

.
Console(config-if)#exit
Console(config)#
21-8
To enter the other modes, at the configuration prompt type one of the following
commands. Use the exit or end command to return to the Privileged Exec mode.
Table 21-2 Configuration Command Modes
Mode
Line
Access
Control List
Class Map
DHCP
Interface
MSTP
Policy Map
Router
VLAN
Command Prompt
line {console | vty} Console(config-line)
access-list ip standard Console(config-std-acl)
access-list ip extended Console(config-ext-acl)
access-list mac Console(config-mac-acl)
access-list ipv6 standard Console(config-std-ipv6-acl)
access-list ipv6 extended Console(config-ext-ipv6-acl)
class map Console(config-cmap)
Page
23-17
26-2
26-2
26-12
26-7
26-7
36-2
39-6
27-1
33-7
36-5
42-6
42-19
ip dhcp pool
interface {ethernet port | port-channel id| vlan id}
spanning-tree mst-configuration
policy map
router {rip | ospf}
vlan database
Console(config-dhcp)
Console(config-if)
Console(config-mstp)
Console(config-pmap)
Console(config-router)
Console(config-vlan) 34-5
For example, you can use the following commands to enter interface configuration
mode, and then return to Privileged Exec mode
Console(config)#interface ethernet 1/5
Overview of the Command Line Interface
21
.
.