Gilderfluke&Co KP-300 Smart Brick Control Panel - Manual (Page 27)

Kp-300 Jumper Configuration
There are about seventy-five jumpers that must be set on the Kp-300 before it can be
used. Not to worry though, each of the fifteen safety inputs has only five options that you
can choose. There is also one jumper that globally affects the E-Stop latches. The
jumpers are located on the back of the printed circuit board that is used in the Kp-300
9 .
If larger quantities of Kp-300s are to be ordered, we can provide them with jumpers al-
ready in the desired positions or permanently soldered into place so that they can not be
easily moved.
The jumpers for all the error inputs are arranged in a series of horizontal rows. As
you can see, the number of the input is shown next to the row which it configures. The
function of each jumper position is also silkscreened next to the jumpers. We would rec-
Kp-300 PCB (Rear View)
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Kp-300 Manual / September 4, 2012 4:29 PM / page 27 of 75
9 We can build Kp-300s with the jumpers on the front of the printed circuit board to restrict access if so desired. Please contact the
factory if you would be interested in such a modification.