Gilderfluke&Co KP-300 Smart Brick Control Panel - Manual (Page 40)

j) Turn on/off any lights as needed to allow the passengers to be
evacuated.
k) On at least the first iteration of this show you will need to stop the
image/audio playback for the show and start the traditional ʻrun for
your livesʼ video message
13 .
l) (optional) Sound an alarm an audio/visual alert can be attached to
any spare digital outputs from the Smart Brick System to alert the
operators of an E-Stop event.
m) If you are controlling a Moog electric motion base: We typically pro-
gram in a ʻMoog Parkʼ and ʻMoog Resetʼ commands instead of the
ʻMoog E-Stopʼ command you might expect
14 . This is because the
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Kp-300 Manual / September 4, 2012 4:29 PM / page 40 of 75
13 Optionally, you may want to start an audio/video message playing on the first iteration.
14 The E-Stop wires into the Moog PC can be connected to the spare terminals on the Kp-300ʼs E-Stop Button so that it can park
the motion base no matter what.