Gilderfluke&Co KP-300 Smart Brick Control Panel - Manual (Page 54)

tem. The v3.0+ Kp-300 has a separate pair of screw terminals for attaching
the 24 vdc supply.
Not surprisingly, the inputs to the Kp-300 are all compatible with the digi-
tal outputs on all of our animation control systems. In most cases the digital
outputs will be coming from a Z-Brick.
The digital output from all Gilderfluke & Co, animation systems is called a
ʻJ6ʼ connector. It defines a forty position insulation displacement (IDS) con-
nector and forty wire ribbon cable. In this case, the Kp-300 needs only
twenty-four of the thirty-two outputs in a J6 cable. That is why the Kp-300
connector is a thirty wire ʻ1/3 J6ʼ, The remaining eight outputs on the J6 ca-
ble can be used for any other purposes:
!
Wire #!Color! Bit #! Description
! 1! Brown! ! Ground
! 2! Red! Bit 7! Show Start Button #8 LED Input To Kp-300
! 3! Orange!Bit 6! Show Start Button #7 LED Input To Kp-300
! 4! Yellow! Bit 5! Show Start Button #6 LED Input To Kp-300
! 5! Green! Bit 4! Show Start Button #5 LED Input To Kp-300
! 6! Blue! Bit 3! Show Start Button #4 LED Input To Kp-300
! 7! Violet! Bit 2! Show Start Button #3 LED Input To Kp-300
! 8! Gray! Bit 1! Show Start Button #2 LED Input To Kp-300
! 9! White! Bit 0! Show Start Button #1 LED Input To Kp-300
!10! Black! ! + 24 Vdc Supply
!11! Brown! ! Ground
!12! Red! Bit 7! Show Start Button #8 Enable Input To Kp-300
!13! Orange!Bit 6! Show Start Button #7 Enable Input To Kp-300
!14! Yellow! Bit 5! Show Start Button #6 Enable Input To Kp-300
!15! Green! Bit 4! Show Start Button #5 Enable Input To Kp-300
!16! Blue! Bit 3! Show Start Button #4 Enable Input To Kp-300
!17! Violet! Bit 2! Show Start Button #3 Enable Input To Kp-300
!18! Gray! Bit 1! Show Start Button #2 Enable Input To Kp-300
!19! White! Bit 0! Show Start Button #1 Enable Input To Kp-300
!20! Black! ! + 24 Vdc Supply
!21! Brown! ! Ground
!22! Red! Bit 7! Show Cycle Counter Input To Kp-300
!23! Orange!Bit 6! Blocking Valve Input To Kp-300
!24! Yellow! Bit 5! Bypass Buss #1 Input To Kp-300
!25! Green! Bit 4! Bypass Buss #2 Input To Kp-300
!26! Blue! Bit 3! E-Stop Show Running Input To Kp-300
!27! Violet! Bit 2! Remote HPU Start Input To Kp-300
!28! Gray! Bit 1! Remote HPU Stop Input To Kp-300
!29! White! Bit 0! Show Pause Reset Input To Kp-300
!30! Black! ! + 24 Vdc Supply
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Kp-300 Manual / September 4, 2012 4:29 PM / page 54 of 75