LEESON Micro Series Compact Inverters - Manual (Page 4)

TABLE OF CONTENTS (cont’d.)
19.0 MICRO SERIES PID SET POINT CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
FEEDBACK DEVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
THE SYSTEM - DIRECT AND REVERSE ACTING . . . . . . . . . . . . . . . . . . . . . . . . 78
PID CONTROL - DIRECT AND REVERSE ACTING . . . . . . . . . . . . . . . . . . . . . . 78
SET POINT REFERENCE SOURCES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
TUNING THE PID CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
MICRO SERIES DISPLAY IN PID MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
20.0 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
21.0 USER SETTING RECORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
NOTE!
The manual covers software version M108314 and above.
See parameter 63 for the software version of the drive you are working with.
If you are working with an earlier software release, you will not have all of the functionality
described in this manual, but the functionality of the drive is fulled documented in this manual.
If you are working with M108313 or earlier, parameters 69 and 70 are described in this manual
as parameters 98 and 99.
2