LEESON Micro Series Compact Inverters - Manual (Page 50)

48
NOTE 1: REFER TO SECTION 18 .0 - DESCRIPTION OF PARAMETERS .
NOTE 2: MAX LIMIT IS 650 Hz ON UNITS WITH HIGH FREQUENCY SOFTWARE.
NOTE 3: IF LINE VOLTS IS SET TO “LOW” (OR SET TO “AUTO” AND THE INPUT
VOLTAGE IS LOW), RANGE IS 25 - 150%.
PARAMETER MENU
PARAM. PARAMETER RANGE OF FACTORY
NUMBER NAME ADJUSTMENT DEFAULT
*22 TORQUE CONSTANT, VARIABLE CONSTANT
CT/NO CMP
23 CARRIER 2.5, 6, 8, 10, 12, 14 kHz 2.5 kHz
25 START NORMAL, POWER-UP, NORMAL
AUTO RE-, RE-BRAKE
26 STOP RAMP, COAST COAST
27 ROTATION FORWARD, REVERSE, FORWARD
FWD&REV, FWD@LOC
28 AUTO/MAN AUTO, MANUAL, BOTH BOTH
29 MANUAL KEYPAD, 0-10 VDC KEYPAD
30 CONTROL LOCAL, REMOTE, BOTH LOCAL
31 UNITS HERTZ, RPM, % HZ, HERTZ
/SEC, /MIN, /HR, GPH, NONE
32 HZ MULT .10 - 650 .0 1 .00
33 SPEED DP XXXXX, XXX .X, XXXXX
XX .XX,X .XXX, .XXXX
34 LOAD MLT 95 - 139% 100%
35 CONTRAST LOW, MED, HIGH MED
36 SLEEP TH .00 - 360.0 Hz 0.00 Hz
37 SLEEP DL 0 .0 - 300 .0 SEC 30 .0 SEC
38 SLEEP BW FB @ MIN - FB @ MAX 0%
39 TB5 MIN .00 - 360.0 Hz (NOTE 2) 0.00 Hz
40 TB5 MAX .00 - 360.0 Hz 60 (NOTE 2) 0.00 Hz
41 AIN FLTR 0 .01 - 10 .0 SEC 0 .02 SEC
42 TB10A OUT NONE, 0-10V, 2-10V NONE