LEESON Micro Series Compact Inverters - Manual (Page 42)

15.0 MICRO SERIES CONTROL WIRING DIAGRAMS
15.1 MICRO SERIES TERMINAL STRIP
Shown below is the terminal strip on the main control board, along with a brief description of the function
of each terminal . Wiring shown above the terminal strip indicates internal wiring on the main control board .
NOTE: The function of terminals TB-10A, TB-10B, TB-13A, TB-13B, TB-13C, TB-13D, TB-14, TB-15,
TB-16, and TB-18 are dependent on the programming of certain parameters . In most cases, the name of
the parameter matches the number of the terminal, allowing quick and easy programming of the terminals
to suit the application. The exception is TB-16 and TB-18, which are governed by Parameter 54 - RELAY.
A complete description of operating the drive in the REMOTE mode can be found in Section 14 .2 . The
following diagrams provide a quick reference to wire the drive for the most common configurations.
40