Yokogawa EJX930A - Manual (Page 111)

<7. Operation of EJXMVTool> 7-18
IM 01C25R51-01E
7.2 Flow Configuration Wizard (Basic Mode)
7.2.1 Flow Configuration Mode
Figure 7.18 Flow Configuration Mode Screen (Basic mode)
Flow Configuration Mode
• Auto Compensation Mode (Default)
Configuration of the fluid physical properties and primary device for the EJX Multivariable
Transmitter can be performed using a dialog window.
• Basic Mode
Flow operation and density compensation are performed conventionally, with the flow
factors being input manually.
NOTE
1. The flow unit is not automatically converted in basic mode.
2. The flow range is set to LRV=0 and URV=100 when the Flow Configuration Mode is changed
to Basic Mode or Auto Compensation Mode.