Yokogawa EJX930A - Manual (Page 30)

<4. Preparation> 4-1
IM 01C25R51-01E
4. Preparation
4.1 PC
To ensure that FlowNavigator functions properly, please make sure your PC meets the
requirements stated in the section ‘3.1’.
All application must be finished.
4.1.1 Setting Items after Installing Windows
It is recommended that the following items be set and confirmed before installation of
FlowNavigator.
● Power Management
FieldMate may not function properly while the sleep, standby and hibernation settings are
enabled. The settings above can be disabled in Windows. The setting procedure is as follows.
<Windows 7>
Log on as a user with administrator privileges, click the Start menu, select Control Panel,
Hardware and Sound, double-click Power Options to display the Power Options Properties dialog
box, and then make sure the following items are set as described below. Note that some of the
items described below may not be displayed depending on the configuration of the PC.
If an item is not displayed, the function is disabled.
• Choose what the power button does.
When I press the power button: Do nothing
When I close the lid: Do nothing
• Choose what to turn off the display
Turn off the display: Never
<Windows Vista>
Log on as a user with administrator privileges, click the Start menu, select Control Panel, double-
click Power Options to display the Power Options Properties dialog box, and then make sure the
following items are set as described below. Note that some of the items described below may not
be displayed depending on the configuration of the PC. If an item is not displayed, the function is
disabled.
• System Settings window
When I press the power button: Do nothing
When I press the sleep button: Do nothing
When I close the lid: Do nothing
• Edit Plan Settings window
Put the computer to sleep: Never